Michael said
Finally is there a way to multichannel out the Mixer Outputs to different auxes in ProTools? Not the individual mixer channels, but the SD3 Mixer Outputs so I can take advantage of some of your effects on those Mixer Outputs.
Hi,
you create either new Instrument Tracks or Aux Tracks in your Pro Tools mixer, then you set their Audio Input to the desired plugin output from SD3.
E.g. you have set up a Reverb on your Bus 3 in the SD3 mixer and you want to have this Reverb return on a separate fader in the Pro Tools mixer.
Go to your Bus 3 in the SD3 mixer and at the bottom of the fader you change the output to Out 3/4.
In the Pro Tools mixer, you create a Stereo Aux Track and set the Input of this track to plugin output > Superior 3 > 3/4.
If you would like to have other Buses or individual faders in the SD3 mixer on separate faders in the Pro Tools, you do it the same way.
Another example; you want the Snare faders from the SD3 mixer on a separate fader in PT.
I would create a Mono Instrument Track in PT and set the Input of this track to plugin output > Superior 3 > 3/4.L.
Then I'd pan the Snare faders hard left in the SD3 mixer and change their outputs to Out 3/4.
In PT, I would also set the MIDI Output of this new Instrument Track to the Superior 3 plugin, in case I want to program the Snare hits on a separate track.
I hope this helps,
John
